BCD Set Commander Cressi X-Pro

1. BCD Cressi Commander

The Commander Jacket is an impressively light high-buoyancy rear-mounted BC, anatomically designed for maximum comfort and wearability.

Its main features are its detachable harness and air cell.
The rear-mounted air cell interferes neither with the main underwater component nor the adjustment straps, not even when it is inflated to the maximum. This means extra freedom of movement and buoyancy for the diver.
The special air cell compression strap guarantees extra quick deflation and volume control. The ultralight rigid back plate with its integrated carrying handle ensures optimal stability. Its integrated Cressi Flat-Lock-Aid weight system makes it extra easy to release the pockets and rear ballast bags (attached to the tank-block band).
Accessories four 50mm shoulder aluminium D-rings and four 25mm aluminium D-rings (of which two on the pockets and two on the lower part of the harness).
There are 3 pressure relief valves: one on the upper part of the hose, one reel-operated valve on the right-hand side of the shoulder and a third on the lower right-hand side of the air cell.
Development of rear-mounted air cell
Air cell material: 420 denier nylon
Integrated Cressi Flat-lock Aid weight System
2 rear ballast pouches
3 pressure relief valves
Four 50mm aluminium D-rings on the shoulder straps
Four 25 mm stainless steel D-rings (2 on the pockets and 2 on the lower part of the harness)
Ultralight rigid back plate with carrying handle
Next generation anatomical inflator with hose retainer
Multipurpose zip pockets
50 mm quick-release buckled shoulder strap

2. Regulator MC9 Compact Pro Cressi

Regulator MC9 Compact Pro Cressi. NEW 2018 !!

The MC9-SEAL CHAMBER 1ST stage is environmentally sealed, protecting it against icing in cold water and against contamination from particulate matter in silty conditions.

The 1st stage MC9-SC is identical to model MC9, but with a special Seal Chamber which completely isolates the diaphragm and spring from contact with water. This makes it ideal for diving in waters that are rich in suspension and mineral salts, e.g. for archaeological work, cavern, scallop/cray, and diving in cold waters.

Hyper-balanced Diaphragm 1st stage with highly technological content that places it at the top of the Cressi range.

Very light body covered by a protective elastomer shell.

Cylinder sheathed in an anti-friction and anti-corrosion material that guarantees perfect sliding of the piston and long maintenance intervals.

The nozzle, made from 316 stainless steel, can be easily d, thus ensuring perfect air-tightness, even after many years of use.

Advanced research on the passage of internal air and a special assistance chamber have enabled the drop of pressure upon inhalation to be kept to a minimum, thus guaranteeing high performance in any situation.

Hyper-balancing allows for an increase of the intermediate pressure at maximum depths and lowering of the pressure in the tank, offering higher performance during the delicate ascent phase and at maximum depths.

DIN 200/300 bar fitting in stainless steel which prevents deformation of the thread in the event that the regulator suffers any falls.

TECHNICAL FEATURES 1ST STAGE

Balanced diaphragm (seal chamber for MC9SC)
2 outlets HP 7/16 UNF
4 outlets MP 3/8 UNF
Service pressure: 300 bar (4350 psi) DIN version, 232 bar (3365 psi) Yoke version
Calibration pressure: 10 Bar
Brass body Electroless Nickel plated
High capacity conical filter electroless nickel plated
Aisi 316 removable nozzle
Hyper-balancing
Anti-pressure drop pneumatic spring
Setting spring: stainless steel with micropeening treatment
Replaceable cylinder with anti-friction and anti-corrosion properties
Elastomer protector
Flow rate: 4500 l/min
Yoke version weight: 650 gr
Din version weight: 510 gr

The XS Compact Pro second stage regulator has a new anti-air expansion to avoid direct contact with metal tongs to prevent freezing in icy environments. This has allowed their approval for use in Freezing water.

Downstream system
Adjustable venturi effect
Patented antifriction lever
Patented sealing washer
Big purge button
Anti-scratch surface
Bayonet-type cap holder with security lock
Stainless steel cover
Removable exhaust tee without tools - Weight without hose: 140 gr

COMBINATION PERFORMANCE

Average Cracking effort 7.5 mbar

Average breathing effort 1.2 J/l

JACKETED HOSE

extremely light and flexible weight: 153 gr

CERTIFICATION

EN250/2000 for cold water

Complete combo DIN or Yoke regulator set comprising Cressi MC9-SC balanced diaphram first stage regulator and Cressi XS Compact Pro second stage regulator.

Technical Characteristics of the 2nd stage XS Compact

Pro with 1st stage MC9-SC :
Average breathing labour: 01.2 J/l.
EN250/2000 certification for cold water
Weight without hose 140 g

(*) Values measured in compliance with standard UNI EN 250.

The second stage comes complete with a black coloured 76 cm long rubber regulator hose.

TOTAL WEIGHT

XS COMPACT PRO MC9-SC INT hose d: 943 gr

Total expected travel weight :

Cressi Ellipse Balanced MC9-SC 1st Stage - DIN 833 gm (with hose)
Cressi XS Compact Pro 2nd Stage 140 gm (without hose)
Light Weight Jacketed Hose 153 gm

3. Octopus Cressi XS Compact

Octopus XS Compact uses the same casing as the XS Compact model made from special hi-tech polymers, the only difference being the yellow front cover.
All the parts of XS Compact , most of which are patented, can be found on this regulator.
The performance is extremely high, although the calibration is regulated so that the inhalation effort is slightly greater than on the XS Compact , to prevent any self-regulating possibility when it is used as a spare regulator.
Octopus XS Compact suits all the Cressi first stages perfectly and all the first stages with an intermediate pressure between 9 and 10 bar

4. AmScuD CONSOLE 2

All AmScuD instruments give a very accurate, clear visibility readings and are made from the best quality materials.
As such, we stand behind our products to give the utmost user experience.
Learning from our over 18 years in the industry, we have sucesfully established both design and materials that is a balanced of functionality, excellent robustness while maintaining a certain cosmetic estathic.
Did we tell you that our gauges are 100% Made in Italy? And it is backed by a full 1-year warranty.
The AmScuD submersible pressure gauge combined with depth gauge and compass, with an internal Bourdon pressure measuring mechanism, gives you clear information on the gas contents of your cylinder.
Dial range is stated in metric standard (BAR) from zero to 400 Bar while the depth gauge will show a METER unit with 1 meter increments.
Dial face is designed with ultra-clarity in mind by being uncluttered, with large black figures on a luminous background giving a long phosphorescent effect. We also color-indicator for a better idea of what states you are in.
This makes viewing as easy as possible, even in poor visibility conditions.
Our gauge case is made from nickel plated brass
The dial window is made of highly shock resistant material (anti-splinter polycarbonate). 400 BAR/5,800 PSI dial gauge for your mission critical applications.
Elasto-Polimer housing to ensure reliability while maintaining its function and esthathics.
Over-pressure capsule fitted in the back of the module to prevent the screen from exploding in the unly event of the internal mechanism failing.
Our exclusive Dual-Recoil® system located both in depth and pressure gauge. Un other gauges in the market, which gauge will fail in case of internal coil is failing, our gauges are designed to have a backup coil.
NITROX compatible with Oxygen Cleaned environment, Viton O-Rings on all parts (swivel + HP port) and Christo-Lube lubricant.
30% longer phosphorecent effect.
Color coded indicator with 10-bar increments (pressure) and 1-meter increments (depth)
Improved swivel umberella design with chanelled o-ring gutter.
7/16" HP port connection.
We designed an angle for the gauge so it is easy to view while maintaining its shape for durability (in case of drop/shock).

SPECIALIST : Alat Selam - Alat Snorkeling - Diving Gear - Diving Set - Kursus Dive Course - Dive Center - Dive Shop - Service Alat Selam - Terra Tabung - Perahu Karet - Banana Boat - Rafting Boat - Mesin Kapal